Powering On For The First Time; Selecting The Country Location - Fluke WaveRunner Getting Started Manual

Powering On for the First Time

When you first turn on a WaveRunner, the General
Settings screen is automatically displayed prompting
you to enter owner information, country location, time
and date information, whether you want to hear button
clicks and turn on/off the Rogue and Unknown devices
auditable alarm. Once you save these settings, the
power up sequence will then bypass the General
Settings screen and open the main screen shown on
the next page.
You can change this information at any time. This
information is accessed from the main screen by
pressing Setup | General Settings.

Selecting the Country Location

The country selection is the first item you should
configure before using the WaveRunner. Country
selection determines which channels are legal and
illegal for a region.
Illegal channels are display in red throughout all
screens. In the Channels screen the channel number
box is displayed in red for illegal channels.
15