To Display And Change Temperature Format - Bradford White EF100T150(E)*(N Service Manual

Step 5: When the desired setpoint is reached on the water heater display, press the "Set" button to confirm the new
setpoint. "Setpoint" stops flashing in the water heater display.
To Display and Change Temperature Format (°F/°C):
To Change Temperature Format in Display from °F to °C or °C to °F:
Step 1: While in "Service Mode", press "Select" button until "°F/°C" is shown in the upper right portion of the water heater
display.
Step 2: Press "Set" button to change temperature format. "°F/°C" symbol will flash in the water heater display.
28
Accessing Service Mode on Control Display
For models with Honeywell Integrated Control
setpoint
°F
idle
Status Operational
SELECT SET
°F °F/C°
idle
Operational
Status
SELECT SET
°F °F/C°
idle
Operational
Status
SELECT SET
28