Table of Contents
Advertisement
Optional extras
Wall mount
1072mm
Install your wall mount at least 1072mm from
the floor. Universal fixings have been included
- please use the correct fixings for the wall type
you're mounting this item to. Please use a stud
finder to ensure no water pipes or electrical
cables are hit.
If you are unsure, please seek professional advice.
Pull the detachable tool kit out from the fixed
section of the wall mount.
The tools can be stored like this on the wall
mount. Your wall mount will look like the
picture on the right when fully assembled with
the product.
You can also carry the detachable part of your
wall mount with you while you clean - attach it
to your belt. Extra precautions must be taken
to ensure you do not damage the product or
injure yourself.
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro2 and is the answer not in the manual?
Questions and answers
The m/c runs for about a min. then stops when put on charge the green lights go on and off
The Gtech Pro 2 may stop running after about a minute due to a low battery. The flashing green lights indicate that the battery is charging. Recharge the battery fully (which takes 4 hours) before using the vacuum again. If the issue persists, check for blockages or other obstructions.
This answer is automatically generated