IMPORTANT SAFETY INSTRUCTIONS • Use only the charger supplied by the • This product contains rechargeable manufacturer to recharge the battery. Li-Ion batteries. Do not mishandle When using an electrical appliance, basic precautions should be observed, the battery as there is risk of possible • Use charger unit only in standard including the following: hazards of burning, fire, or explosion. electrical outlet (120V – 60Hz). • To avoid possible hazards from Read all instRuctions befoRe using youR VacuuM. • Unplug the charger from outlet when the battery do not open, crush, not in use and before conducting WaRning: disassemble, heat above 60°C , maintenance. to reduce the risk of fire, electric shock, or injury: expose to high temperatures or • Use charger in dry location only.
Thank you for choosing a Gtech AirRam Assembly Operation “I started Gtech to create sensible, easy to use products, which do a great job. Your opinion is important to us. Please take the time to write a review of the AirRam either on the website of the store you bought it from or by emailing us at support@greytechnology.com. We will use your feedback to improve our products and services and let other people know what it’s like to be part of the Gtech family.” Nick Grey – Inventor, Owner of Gtech Register your warranty now at: www.greytechnology.com/register You will need your serial number, which is on the base of your Gtech AirRam. Keep your receipt with this manual, you will need it if you ever have a warranty claim. What’s in the box Main unit Upper handle Battery Charger Filter assembly (Filter assembly and bin are already in place) Slide the handle into place until it clicks.
Battery charging Emptying the bin When the lights rapidly cycle red, recharge Plug the charger in and connect it to Using both hands, reach under the bin and Lift the filter assembly off the bin. the battery. the battery. lift it out of the AirRam. hour hours boost After 4 hours the LEDs turn green It is OK to charge for 1 hour for a burst Tip the dirt bales straight into a wastebasket. and charging is complete. of cleaning.
Cleaning the filters - do this once a month Clearing a jam Use a coin to unlock the filter assembly. Lift off the lid. The filters sit in the filter If the brush bar jams during use, the Before checking for a blockage, assembly white side up. AirRam will stop and the LEDs will remove the battery. appear red. seconds Remove the filters from the filter assembly. Wash under a tap. Squeeze out any excess Carefully pull any hair or fiber from the The AirRam will not re-start until the red water and leave the filters to dry thoroughly brush bar. If you need to, you can slide lights go out. This may take a few seconds. in a warm, well-ventilated place. a pair of scissors along the ridge in the brush bar.
Product Care WARRANTY – TERMS AND CONDITIONS Your Gtech AirRam doesn’t need much maintenance: keep the filters clean, keep the brush if your gtech airRam breaks, don’t worry, we’re here to help. bar tangle-free and charge the battery. Wipe it with a dry cloth if it gets dirty, including under call 1-855-483-2440 for assistance. the bin. Never wash it with liquid, run it under a tap or use it without the filter. to qualify for your 2-year warranty, register your airRam within 3 months Troubleshooting of purchase at: AirRam is not cleaning well 1. Empty the bin...
Page 7
Gtech USA 66 York Street, Jersey City, NJ 07302 email: support@greytechnology.com Customer Service: 855-483-2440 www.greytechnology.com...
Need help?
Do you have a question about the AirRAM AR05 and is the answer not in the manual?
Questions and answers