Limited Warranty; Ordering Procedure - Johnson Controls tyco TY-FRB Series Manual

TFP176
Page 6 of 6
K TYPE
HORIZONTAL SIDEWALL (TY3331)
5.6
RECESSED HORIZ.
1/2 in.
SIDEWALL (TY3331)
NPT
VERTICAL SIDEWALL
(TY3431)
NOTES:
1. The maximum working pressure of 250 psi (17,2 bar) only applies to the Listing by Underwriters Laboratories, Inc. (UL); the Listing by Underwriters Laboratories, Inc. for use in
Canada (C-UL); and, the Approval by the City of New York.
P/N 57 – XXX – X – XXX
378 HORIZONTAL SIDEWALL
375 VERTICAL SIDEWALL
SERIES TY-FRB HORIZONTAL AND VERTICAL SIDEWALL SPRINKLERS
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com
1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700
© 2018 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;
TEFLON is a registered trademark of DuPont
NATURAL BRASS
TABLE B
MAXIMUM WORKING PRESSURE
SIN
TY3331 1
POLY-STAINLESS GREY
TY3431
2 ALUMINUM (RAL9007)
PURE WHITE (RAL9010)
3
SIGNAL WHITE (RAL9003)
4
JET BLACK (RAL9005)
5
7
9
NOTES:
1. Available for TY3331 only.
2. Eastern Hemisphere sales only.
3. Available in 155°F (68°C) or 200°F (93°C
temperature rating only.
TABLE C
PART NUMBER SELECTION
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name and Part Number
(P/N).
Sprinkler Assemblies with NPT
Thread Connections:
Specify: Series TY-FRB (specify SIN),
(specify K-factor), (specify) Horizontal
Sidewall or Vertical Sidewall Sprinkler,
Standard Response, Standard
Coverage, (specify) temperature
rating, (specify) finish or coating, P/N
(specify from Table C)
SPRINKLER FINISH
CHROME PLATED POLYESTER
250 PSI (17,2 BAR)
or
175PSI (12,1 BAR)
(SEE NOTE 1)
175 PSI (12,1 BAR)
SPRINKLER
FINISH
NATURAL BRASS
1
POLYESTER
2
POLYESTER
POLYESTER
3
POLYESTER
LEAD COATED
CHROME PLATED
Recessed Escutcheon
Specify: Style (10 or 20) Recessed
Escutcheon with (specify*) finish, P/N
(specify*)
* Refer to Technical Data Sheet TFP770
Sprinkler Wrench
Specify: W-Type 6 Sprinkler Wrench,
P/N 56-000-6-387
Specify: W-Type 7 Sprinkler Wrench,
P/N 56-850-4-001
LEAD COATED
TEMPERATURE
RATINGS
135 135°F (57°C)
155 155°F (68°C)
175 175°F (79°C)
200 200°F (93°C)
286 286°F (141°C)