Toyota 1RZ Supplement Manual page 519

CLICK HERE TO VIEW CHAPTER INDEX
CH- -12
SST
SST
Bearing Cover
CHARGING - - ALTERNATOR
10. INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
11 . IF NECESSARY, REPLACE FRONT BEARING
(a) Remove the 4 screws, bearing retainer and bearing.
P14471
(b) Using SST and press, press out the bearing.
SST
P22368
(c) Using SST and a press, press in a new bearing.
SST SST
(d) Install the bearing retainer with the 4 screws.
Torque: 2.5 N.m (27 kgf∙cm, 23 in. lbf)
P22369
12. INSPECT REAR BEARING
Check that the bearing is not rough or worn.
13. IF NECESSARY, REPLACE REAR BEARING
(a) Using SST, remove the bearing covers and bearing.
SST
NOTICE:
Be careful not to damage the fan.
N00581
(b) Place the bearing cover on the rotor.
P05052
3RZ-F,3RZ-FE
09950 -- 60010 (09951 -- 00260, 09952 -- 06010)
09950 -- 60010 (09951 -- 00500)
09820 -- 00021
CONTINUED
Pages From Supplement
TO MODEL INDEX