Toyota 1RZ Supplement Manual page 249

CLICK HERE TO VIEW CHAPTER INDEX
DTC
CIRCUIT DESCRIPTION
Refer to DTC P0335/12 (Crankshaft Position Sensor Circuit Malfunction)
DTC No.
No crankshaft position sensor signal to engine ECU with en-
P1335/13 P1335/13 gine speed i
1,000 rpm or more
WIRING DIAGRAM
Refer to DTC P0335/12 (Crankshaft Position Sensor Circuit Malfunction)
DIAGRAM.
INSPECTION PROCEDURE
HINT:
Read freed frame data using hand--held tester. Because freeze frame records the engine conditions when
the malfunction is detected, when troubleshooting it is useful for determining whether the vehicle was run-
ning or stopped, the engine warmed up or not, the air--fuel ratio lean or rich, etc. at the time of the malfunction.
Refer to DTC P0335/12 (Crankshaft Position Sensor Circuit Malfunction)
DIAGNOSTICS
P1335/13 Crankshaft Position Sensor Circuit
Malfunction (during engine running)
DTC Detecting Condition
d
3RZ-F,3RZ-FE
- - ENGINE (2RZ- -FE, 3RZ- -FE)
on page DI -- 137.
S Open or short in crankshaft position sensor circuit
S Crankshaft position sensor S Crankshaft position sensor
S Starter
S Engine ECU
on page DI -- 137
on page DI -- 137.
Pages From Supplement
TO MODEL INDEX
DI- -157
DI1IP- -01
Trouble Area
for the WIRING
CONTINUED