Advertisement
CLICK HERE TO VIEW CHAPTER INDEX
CO- -14
Dimension "B"
Claw
SST
Stopper Bolt
A01600
Part "A"
Stopper Bolt
SST
Overhaul Handle
CO1205
Tank
Lock Plate
A01601
Tap
A01602
A01714
COOLING
- -
RADIATOR
DI SASSEMBLY
1 .
RE MO V E RADI ATO R S UP P O RTS
(a)
Remove the 4 bolts and 2 radiator supports.
2 .
RE MO V E DRAI N P LUG
3.
ASSEMBL E SST
SST
09230 -- 01010
(a)
Install the claw to the overhaul handle, inserting it in the
hole in part "A" as shown in the diagram.
(b)
While gripping the handle, adjust the stopper bolt so that
dimension "B" shown in the diagram is 0.2 -- 0.3 mm
(0.008 -- 0.012 in.).
NOTICE:
If this adjustment is not done, the claw may be damaged.
4 .
UNCAULK L O CK P LATE S
Using SST to release the caulking, squeeze the handle until
stopped by the stopper bolt.
SST
09230 -- 01010
5 .
RE MO V E TANKS AND O - - RI NG S
(a)
Lightly tap the radiator port (inlet or outlet) with a soft--
faced hammer, and remove the tank.
(b)
Remove the O--ring.
6.
1RZ - - E:
RE MOVE OIL COOLER FROM LOWE R TANK
(a)
Remove the pipes.
HINT:
Make a note of the direction to face the pipes.
(b)
Remove the nuts and plate washers.
(c)
Remove the oil cooler and O--rings.
3RZ-F,3RZ-FE
Pages From Supplement
TO MODEL INDEX
CO079- -01
Hide quick links:
Advertisement
