Toshiba RAV-GM1601ATP-E (TR) Service Manual page 97

No. Part name
2. Attachment
Fan motor
5
(Continued)
Attachment the fan motor in the reverse
process of "1. Detachment".
*
• Tighten the flange nut to 4.95 N.m (50 kgf.cm)
• To prevent the fan motor leads from coming in
• Ensure to bundle again with a commercially
Procedure
Precaution when assembling the fan motor.
contact with the propeller fan ensure to adjust
the length of the fan motor lead fixing rubber
so that the fan motor lead has no slack.
Attach the fan motor lead fixing rubber to the
partition plate so that the projection is on the
refrigerant cycle side.
available cable clamp where the cable clamp
was removed.
Base motor
Screw
Fan motor
Core clamp
White binding band
Binding band
Fixing rubber
Cable clamp
Claws
Cable clamp
- 97 -
Remarks
Partition plate
Fixing rubber
Fan motor lead (Upper)
Fan motor lead (Upper)
Partition plate
Fan motor lead (Lower)
Fan motor lead (Lower)