Repair
Electrode Replacement
Replacement
Electrode
Electrode
Replacement
1. Follow the steps in
Prepare the Gun for Service, page
2. Remove the air cap and nozzle. See
Air Cap and Nozzle Replacement, page
3. Unscrew the electrode (3) with the multi-tool (41).
NOTICE
NOTICE
NOTICE
To avoid damaging the plastic threads, be very
careful when installing the electrode.
4. Apply low-strength purple threadlocker to the
electrode and packing rod threads. Install the
electrode finger-tight. Do not overtighten.
5. Install the fluid nozzle and air cap. See
Air Cap and Nozzle Replacement, page
NOTICE
NOTICE
NOTICE
To avoid equipment damage, use only the
electrode needle available in kit 26A416.
Alternate electrodes are not acceptable for use
and do not fit the packing rod threads.
Figure 25 Electrode Replacement
52
Needle Replacement
Needle
Needle
1. See
48.
2. Remove the air cap and nozzle. See
Air Cap, Spray Tip, and Nozzle Replacement
49.
(Model L60M19), page
3. Unscrew the needle (3).
4. Apply low-strength (purple) Loctite® or equivalent
thread sealant to the needle and packing rod
threads. Install the needle finger-tight. Do not
overtighten.
5. Install the fluid nozzle and air cap. See
Air Cap, Spray Tip, and Nozzle Replacement
(Model L60M19), page
6. See
49.
Figure 26 Electrode Replacement
Replacement (Model
(Model L60M19)
Replacement
(Model
Prepare the Gun for Service, page
50.
50.
Test Gun Resistance, page
L60M19)
L60M19)
48.
39.
3A7504A