Levelling; Electric Power Supply - KERN ADB-A Series Operating Instruction

 Put the following parts upon in the right order
•
Carrier of weighing plate
•
Weighing pan

7.3 Levelling

 Level balance with foot screws until the air bubble of the water balance is in the
prescribed circle.
Check levelling regularly.

7.4 Electric power supply

Select a country-specific mains plug.
Check, whether the voltage acceptance on the scales is set correctly.
Do not connect the scales to the power grid unless the information on
the instrument (sticker) matches the local mains voltage.
Only use KERN original mains adapter. Using other makes requires
consent by KERN.
Important:

Prior to commissioning check the mains cable for damage.

Make sure that the mains adapter will not be in touch with liquids.

The mains plug must be accessible at any time.
Connect the mains adapter to the connecting socket on the backside of
the balance and to the power mains.
The display unit lights up. As soon as the balance is supplied with energy,
the indicator [
The error message <P FAIL> indicates that the balance was
disconnected from power supply without pressing the ON/OFF button.
Remedy:
Press ON/OFF. The device will carry out a display test.
The balance is ready for weighing once the weight indication appears.
12
] is displayed.
ADB_ADJ-BA-e-1830