Table of Contents
Advertisement
Installer Menu
Use the Installer Menu to set up, change, or view operational settings. This section describes how
to access, use, and exit the Installer Menu from the TV itself. However, you should also refer to the
Installer Menu descriptions in this document if you are configuring the TV CPU using an FTG
Configuration (.tlx) file created using LG's Cloud Configuration Tool.
Refer to the table on pages 40 and 41 for brief descriptions of Installer Menu items. More
detailed descriptions follow the table listing.
Accessing the Installer Menu
1. Turn ON the TV.
If the First Use Wizard appears on the screen when you turn ON the TV, exit the wizard.
2. Using an Installer Remote, press MENU SETTINGS repeatedly until the on-screen display of
the TV setup menus (if the TV is in Pass-through Mode) or the Function Menu (if the TV is not
in Pass-through Mode) no longer toggles, and then press the Installer Menu entry sequence
(e.g., 9-8-7-6) + OK to access the Installer Menu.
Note: The default Installer Menu entry sequence is "9876"; however, if Installer Menu item 000
INSTALLER SEQUENCE has been modified, the entry sequence may be one of three additional
options. See Installer Menu detailed descriptions for further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V#.##.###
PTC Version
Note: If the password (entry sequence) is not entered or registered correctly, you will see the
message "ENTER PASSWORD 0000" at the top of the screen instead of the Installer Menu
header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will
display.
Note: If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only. Also,
the TV Zone # will be indicated in the Installer Menu header under the configuration mode indicator
described below.
38
xxLS660V
CPU - CTV
000
S3 ##.## 7F78
CPU V#.##.##.##
CPU Version
Typical Installer Menu
The Installer Menu header will vary
depending on the TV you are setting
up. In the Installer Menu footer, you
can see the current software versions
of the TV, as indicated.
206-4354
Advertisement
Table of Contents
