Schedule; Auto Reconnect - Bosch BCC100 Installation Manual And User's Manual

Initial Setup
For an unregistered device, click the green Registration button
to register your account. If you want to register a different
account to your device, you can also click the Registration
button and follow the steps outlined in the App Setup section
of this User Guide.

Auto Reconnect

If your device loses connection with your wireless network, it
will automatically attempt to reconnect after 5 minutes. If that
fails, it will make a new attempt every 15 minutes for the next
24 hours. Any manual network reconfiguration of the
thermostat will stop automatic reconnection attempts.
16

Schedule

Choose the schedule you would like to modify, or select No
Schedule if you do not wish to set up a schedule at this time,
and click the Setup button or Next arrow.
Note: Home is the default schedule for your BCC100. If you wish
to add a different schedule, use the Bosch Connected Control
App.
To set up your periods for the day, click on the Start Time
bubble of the period and use the Up/Down arrows to set the
start time of the first period of the day.
1.
Next, click the Heat bubble and use the Up/Down arrows to
set the heating setpoint for the first period of the day.
2.
Then, click the Cool bubble and use the Up/Down arrows to
set the cooling setpoint for the first period of the day.