Bosch PSM VENTARO 1400 Original Instructions Manual page 17

OBJ_BUCH-39-004.book Page 17 Tuesday, July 21, 2009 2:15 PM
Switch the vacuum cleaner off before per-
forming adjustments on the machine,
changing accessory parts or placing down
the sander. This safety measure prevents un-
intended starting of the sander.
Maintain the sander and the vacuum clean-
er with care. Check for misalignment or
binding of moving parts, breakage of parts,
and any other condition that may affect the
operation of the machine. Have damaged
parts repaired before using the machine.
Many accidents are caused by poorly main-
tained power tools.
Have the sander and the vacuum cleaner re-
paired only through qualified specialists
and only using original spare parts. This en-
sures that the safety of your machine is main-
tained.
Safety instructions for the sander
Do not vacuum liquids. The pene-
tration of water into the vacuum
cleaner increases the risk of an
electric shock.
Do not allow children to use the vacuum
cleaner without supervision. Children can
injure themselves.
Keep the vacuum cleaner away from rain
and moisture. Water entering the vacuum
cleaner increases the risk of an electric
shock.
Do not vacuum hot or burning dusts. Do not
operate the vacuum cleaner in hazardous
locations. The dusts or vapours can ignite.
Do not use the vacuum cleaner when the
mains cable is damaged. Do not touch the
damaged cable and pull the mains plug
when the cable is damaged while working.
Damaged cables increase the risk of an elec-
tric shock.
Do not pinch the cable. Do not misuse the
cable for pulling the plug out of the socket
outlet or moving the vacuum cleaner. Dam-
aged cables increase the risk of an electric
shock.
Bosch Power Tools
When operating the vacuum cleaner in
damp environments, use a residual current
device (RCD). Using a residual current de-
vice (RCD) reduces the risk of an electric
shock.
Do not vacuum materials that are harmful to
one's health, e. g. dust from beech or oak
wood, masonry dust, asbestos. These mate-
rials are considered carcinogenic.
Have the vacuum cleaner repaired only
through qualified specialists and only using
original spare parts. This ensures that the
safety of your vacuum cleaner is maintained.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Intended Use
Multi Sander
The multi sander is intended for dry sanding and
polishing of wood, filler (except for gypsum) as
well as coated surfaces. It is especially suitable
for profiles, corners or hard to reach locations.
Vacuum Cleaner
The vacuum cleaner is intended to vacuum/ex-
tract and blow out non-hazardous materials.
1 609 929 S60 | (21.7.09)
English | 17