Maintenance; Troubleshooting; Parts List - GE Integritas 3TL125-SACY-D10Y-P000 Quick Start Manual

Maintenance—Air Filters
Air Filters should be washed or replaced at intervals determined by the installation environment—dusty environments require more fre-
quent service.
Air filters may be washed and reused.
1. Remove air filter carrier—2 thumb screws.
2. Remove and replace air filter.
Air filter slides out to the rear of the air filter carrier.
3. Replace air filter carrier with filter—secure with 2 thumb screws.
Filter Washing
1. Wash filter in soap water.
2. Gently wring out by hand.
3. Air dry for at least 24 hours before installing into filter carrier.

Troubleshooting

Troubleshooting tables are in the Pulsar Plus Controller Family Troubleshooting Table document.

Parts List

Comcode Description
150050531 IP020ACR125ATEZ
150050530 IP050ACR048ATEZ
150052733 IP100ACR024ATEZ
8600092348P Blank IP Charger Module Faceplate
Comcode Description
1600093508A IP843G_24V_S CONTROLLER MODULE
1600093510A IP843G_48V_S CONTROLLER MODULE
1600093509A IP843G_125V_S CONTROLLER MODULE
1600093511A IP843G_IO MODULE
continued on next page
20
Power Modules
Application
125VDC Hot-Swappable Integritas Charger Module, Single Phase 120 -
277AC Input, 20A Output
48VDC Hot-Swappable Integritas Charger Module, Single Phase 120 -
277AC Input, 50A Output
24VDC Hot-Swappable Integritas Charger Module, Single Phase 120 -
277AC Input, 100A Output
Blank filler for empty charger slots
Controller Modules
Application
Integritas Wall Charger, Hot- Swappable 24VDC Controller Module with
secure protocols
Integritas Wall Charger, Hot- Swappable 48VDC Controller Module with
secure protocols
Integritas Wall Charger, Hot- Swappable 125VDC Controller Module with
secure protocols
Integritas Wall Charger, Input / Output Module (Compatible with all
charger voltages)
Integritas Wall Mount Charger - Quick Start Guide
Document 8600092587P r03 2018 August