ADF Web HD67947-B2 User Manual page 24

Industrial Electronic Devices
In the field "Bit Mode" insert the start bit of the first byte of the field "Position" where start to insert the data read;
In the field "Lenght" the dimension of the KNX message is defined;
In the field "Mnemonic" the description for the request is defined.
Note:
If the field "On change" is checked and the "Poll Time" is different from 0, the converter sends the KNX command cyclically and also
when the data is changed.
Note:
If the field "OnCMD", "OnChange" and "OnTimer" are not checked, the converter only sniffs the bus in order to monitor the status of
the KNX message.
ADFweb.com S.r.l.
User Manual KNX/ MQTT - Coverter
Document code: MN67947_ENG Revision 1.000 Page 24 of 31