Digital Output - Pwm; Analogue Output In Voltage / In Current - gefran CAN-IO Installation And User Manual

Digital output - PWM

L
O
A
D
+VI24
GNDI
The digital output is available in three versions: 0.5 A, 2 A and PWM, identified respectively as DOLx and DOHx.
Before connecting a charge, check that the Output chosen is adequate. Do not connect charges with higher absorption than
that indicated in the technical specifications.

Analogue output in voltage / in current

Voltage
650Ω Max.
L
O
A
D
Current
600Ω Max.
+VI24
GNDI
The analogue output is available in two versions: in voltage and in current, identified respectively as AOVx and AOCx.
Do not connect charges that do not fall within the technical specifications. Use a bipolar screened cable and connect the
screening to the earth bar as close as possible to the module.
28
SHIELD
DOL1
AOV1
GNDI
80990B_MHW_CAN-IO_12-2016_ENG