Analogue Input In Current - 2-Wire Amplified Transducer; Analogue Input In Current - 4-Wire Amplified Transducer - gefran CAN-IO Installation And User Manual

Analogue input in current – 2-wire amplified transducer
+
+
-
Power supply
+
+VI24
GNDI
Use a screened bipolar cable and connect the screening to the earth bar as close as possible to the module.
Attention: do not forget to bridge the AI1mA port with +AI1.
Analogue input in current – 4-wire amplified transducer
+
+
-
-
Power supply
+ -
+VI24
GNDI
Use a screened bipolar cable and connect the screening to the earth bar as close as possible to the module.
Attention: do not forget to bridge the AI1mA port with +AI1.
26
SHIELD
SHIELD
AI1mA
+AI1
AI1mA
+AI1
GNDI
80990B_MHW_CAN-IO_12-2016_ENG