Analogue Input In Voltage; Analogue Input In Current - gefran CAN-IO Installation And User Manual

Analogue input in voltage

+
-
+VI24
GNDI
Use a screened bipolar cable and connect the screening to the earth bar as close as possible to the source of voltage.

Analogue input in current

+
-
+VI24
GNDI
Use a screened bipolar cable and connect the screening to the earth bar as close as possible to the source of current.
Attention: do not forget to bridge the AI1mA port with +AI1.
80990B_MHW_CAN-IO_12-2016_ENG
SHIELD
SHIELD
+AI1
GNDI
AI1mA
+AI1
GNDI
25