Potentiometer Analogue Input; Electric Resistance Extensometer Analogue Input ("Strain Gauge") - gefran CAN-IO Installation And User Manual

Potentiometer analogue input

+VI24
GNDI
Use a screened cable with 3 conductors and connect the screening to the earth bar as close as possible to the module.
The potentiometer must have a resistance value greater than or equal to 2 kΩ.

Electric resistance extensometer analogue input ("strain gauge")

+VI24
GNDI
Use a screened cable with 4 or 6 conductors and connect the screening to the earth bar as close as possible to the module.
For the calibration of the transducer, envisage the use of calibration wires outside the module.
80990B_MHW_CAN-IO_12-2016_ENG
SHIELD
SHIELD
VP1
+AI1
AI1mA
VS1
+AI1
-AI1
GNDI
27