Table of Contents
Advertisement
ZyAIR B-400 Quick Installation Guide
Wireless Navigator Installation
The Wireless Navigator Utility is provided to allow users to easily
configure the B-400 adapter using any Windows-based PC. This
section describes procedures for installing the Wireless Navigator
Utility onto the PC.
Note!
Note!
Step 1: Insert the installation CD-ROM into the CD-ROM drive. Run
the SETUP.EXE program on the CD-ROM. The following
window will be shown automatically.
Please make sure that the PC already has the
TCP/IP protocol installed. If not, please consult
the Windows help file for assistance with setting
up TCP/IP on the PC.
If the B-400 adapter is used with a non-PC
Ethernet device such as a print server or game
console, users can still install the Wireless
Navigator in any PC located in the same IP
subnet with the B-400. The utility can locate the
B-400 via both wired and wireless Ethernet
connections for remote management.
— 9 —
Advertisement
Table of Contents
