Table of Contents
Advertisement
ZyAIR B-400 Quick Installation Guide
Physical Details
Rear Panel
INIT Button
LAN Cable
Selection Switch
INIT Button
LAN Cable
Selection Switch
X: Crossover: the RJ-45 port Tx and Rx lines are reversed. Use
this setting when using a straight cable connected to a PC or
other Ethernet device. It is also the factory default setting.
II: Straight: Straight: the RJ-45 port Tx and Rx lines are normal.
Use this setting when using a straight cable connected to an
Ethernet device, such as an Ethernet hub/switch.
"INIT" means "Initialize". Pressing the button will
reboot the device and restore the settings to the
factory default settings.
— 6 —
LAN Connection
Power Input
Advertisement
Table of Contents
