Contec CMS50D+ Manual page 46

100 11.67 23.33
For transmitters rated at a maximum output power not
listed above, the recommended separation distance d
in metres (m) can be estimated using the equation
applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter
in watts (W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation
distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all
situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and
people.
42