Contec CMS50D+ Manual page 19

B. Change display direction
The device could change display direction according to
the handing direction.
C. Pause alarm:
a) Alarm including the alarm of measure data's going
beyond the limits, the alarm of low-voltage, the alarm
of finger's out of position.
b) On the measuring interface, if the alarm function is on,
during the period of alarming, you can pause it by
pressing the button shortly, but the function will be
renewed in about 30 seconds.
c) If you want to turn off the alarm for good, you should
enter the menu for operation.
D. Data transmission setting
Firstly, please install the affiliated software into the
computer, and two icons would appear on the desktop
after installation. The icon of "SpO
Figure 4. Put finger in position
2
15
Assistant "is a