On the alarm direction setting interface,Click the button to
select "SpO
2
to enter the SpO
in Figure 9:
Click the button to select "Dir", then Press the button to
choose Up or Down (this will be the direction the value of
the high-low limits of SpO
To raise the SpO
then Click the button to select high limit (High) or low limit
(Low),Press the button and hold to adjust the selected limit
to the desired higher value and release the button once the
higher limit has been reached.
To lower the SpO
Alm"or "PR Alm",then Press the button (1 sec)
or PR direction setting interface as shown
2
and pulse rate limit, choose "Dir" as 'Up',
2
and pulse rate limit, choose "Dir" as
2
Figure 8.
Figure 9.
and pulse rate will be adjusted)
2
18