Contec CMS50D+ Manual page 44

predicted theoretically with accuracy. To assess the
electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the
location in which the CMS50D+ is used exceeds the
applicable RF compliance level above, the CMS50D+
should be observed to verify normal operation. If
abnormal performance is observed, additional
measures may be necessary, such as reorienting or
relocating the CMS50D+.
b
Over the frequency range 150 kHz to 80 MHz,
field strengths should be less than 3 V/m.
Recommended separation distances between portable
and mobile
RF communications equipment and the EQUIPMENT
or SYSTEM –
for EQUIPMENT or SYSTEM that are not
LIFE-SUPPORTING
Recommended separation distances between
portable and mobile RF communications
equipment and the CMS50D+
40