Profi Air DSS 2034 Manual page 9

OF A PROFIAIR PNEUMATIC IMPACT SCREWDRIVER
Technical data
1. Air requirement
2. max. permissible working pressure
3. Connections
4. Square receptacle
5. Tightening torque
6. Release torque
7. Rotation speed
8. Sound pressure level
9. Vibration
10. Weight
11. Recommended hose diameter (interior) 10 mm
AHS GmbH, Uhlandstraße 50, A-4600 Wels
Release torque
6,3 bar
2034 Nm
Air requirement
198 l/min
Square receptacle
3/4"
Weight
3,40 kg
Intended use
This compressed-air tool is a handy device for private use that operates on compressed air.
It is suitable for tightening and loosening screw connections in the automotive field (tyre
fitting) as well as in the field of agriculture. The plugs can be exchanged simply and rapid-
ly. The compressed air supply is attached via a quick-connect coupling. Observe the requi-
red tightening torques when tightening the screws and nuts. Use a torque wrench after
tightening.
Only use this machine according to its intended use! Any use extending beyond this does
not constitute intended use. The user, not the manufacturer, is liable for resulting damages
or injuries of any kind.
1231670_BDA_ProfiAir_DSS_2034_DL_Schlagschrauber.indd 8
CONGRATULATIONS ON THE PURCHASE
GB
198 l/min
6,2 bar
„
3/8 socket
„
3/4
1627 Nm
2034 Nm
5500 U/min.
84 dB(A)
10,2 m/sec²
3,4 kg
max. permissible working pressure
6,2 bar 6,2 bar
5500 Revolutions per minute
U/min
Sound pressure level
84 dB(A)
8
13.10.16 14:50