Profi Air DSS 2034 Manual page 13

Compressed-air connection
• Recommended Ø of the compressed-air line, 10 mm on the interior. Smaller diameters
can result in performance loss.
• The service life of the unit will be reduced if a maintenance unit with a condensation
discharge is not used. The moisture in the compressed air can result in corrosion inside
the unit.
Adjusting the torque
• Set the rotary knob D to the desired level.
A selection between 3 levels can be made.
Level 1 = low torque
Level 3 = high torque
1231670_BDA_ProfiAir_DSS_2034_DL_Schlagschrauber.indd 12
R
B
12
D
F
A
13.10.16 14:50