Table of Contents
Advertisement
Quick Links
PD-T813X
Trusted Processor Interface Adapter
Product Overview
This document provides general information for the Trusted® Processor Interface Adapter T813X.
The Adapter provides easy access to the communications ports of the Trusted Triple Modular
Redundant (TMR) Processor (T8110B) in the Controller Chassis for the Distributed Control System
(DCS) and other links. The unit is also used to enable a number of extended facilities available on
the Trusted TMR Processor including facilities for the reception of IRIG-IRIG-B time synchronisation
signals, enabling the use of Dual ('enhanced') Peer to Peer and enabling the Trusted System to
become Modbus Master.
Features:
• Allows easy access for external systems to communicate with a Trusted TMR Processor.
• Easy installation (connects directly to the rear of the Controller Chassis).
• Two RS422/485 configurable 2 or 4 wire connections.
• One RS422/485 2 wire connection.
• Fault/fail connections for Active and Standby Processors.
• Processor diagnostics connection.
• PSU shutdown monitor connections.
• Enables IRIG-B122 and IRIG-B002 time synchronisation signals.
• Enables Modbus Master on the Trusted Communications Interface.
• Enables ICS2000 to Trusted Interface.
Rockwell Automation Publication PD-T813X
Issue 7
Trusted
Advertisement
Table of Contents
Related Manuals for Rockwell Automation Trusted T813 Series
Summary of Contents for Rockwell Automation Trusted T813 Series
- Page 1 • Fault/fail connections for Active and Standby Processors. • Processor diagnostics connection. • PSU shutdown monitor connections. • Enables IRIG-B122 and IRIG-B002 time synchronisation signals. • Enables Modbus Master on the Trusted Communications Interface. • Enables ICS2000 to Trusted Interface. Rockwell Automation Publication PD-T813X Issue 7...
- Page 2 Trusted PD-T813X Page intentionally left blank Rockwell Automation Publication PD-T813X Issue 7...
- Page 3 PREFACE PREFACE In no event will Rockwell Automation be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples given in this manual are included solely for illustrative purposes. Because of the many variables and requirements related to any particular installation, Rockwell Automation does not assume responsibility or reliability for actual use based on the examples and diagrams.
- Page 4 Your comments help us to write better user documentation. If you discover an error, or have a suggestion on how to make this publication better, send your comment to our technical support group at http://rockwellautomation.custhelp.com Issue 7 Rockwell Automation Publication PD-T813X...
- Page 5 IMPORTANT Identifies information that is critical for successful application and understanding of the product. NOTE Provides key information about the product or service. Tips give helpful information about using or setting up the equipment. Rockwell Automation Publication PD-T813X Issue 7...
- Page 6 CAUTION: The module PCBs contains static sensitive components. Static handling precautions must be observed. DO NOT touch exposed connector pins or attempt to dismantle a module. Issue 7 Rockwell Automation Publication PD-T813X...
- Page 7 Port purposes Sep 14 Fault/Fail connector identity Sep 15 Rebranded and reformatted with standardisation of the Relative Humidity Range and Operating Temperature specifications Apr 16 Updated to incorporate IEEE standards and correct typographical errors Rockwell Automation Publication PD-T813X Issue 7...
- Page 8 PREFACE Trusted TMR Processor Interface Adapter Page intentionally left blank Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 9: Table Of Contents
1.7. IRIG-B Connector (J5) ........................8 1.8. Mating Connectors ........................8 Installation ......................9 Input Configuration....................11 3.1. Serial Ports ..........................11 3.2. IRIG-B Ports ..........................11 Available Operations ..................... 13 Specifications ......................15 Rockwell Automation Publication PD-T813X Issue 7... - Page 10 Table of Contents Trusted TMR Processor Interface Adapter Page intentionally left blank Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 11: Description
The Adapter also provides the option of connecting IRIG-B time synchronisation signals to the Processor. Connection between the Adapter and the Trusted TMR Processor is via two 48-way DIN41612 E-type connectors (SK1), one each for connection to the Active and Standby Processors. Rockwell Automation Publication PD-T813X Issue 7... - Page 12 An earth point is provided on the PCB so that the Chassis earth of the Processor will be connected to the shell of the Adapter and module rack earth. It is an important safety and Emergency Shutdown ESD requirement that the equipotential bonding is connected and maintained. Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 13: Processor Interface Connector (Sk1)
24 V PSU 1 Shutdown Warning 24 V PSU 2 LV Serial Port 3 A RX/TX 24 V PSU 2 Shutdown Warning 24 V Return 24 V Return 24 V Return Table 1 Connector SK1 Pinout Rockwell Automation Publication PD-T813X Issue 7... -
Page 14: Fault/Fail Connectors (J2 And J3)
System Healthy LED flashing red. FAIL NC relay contacts open on Processor shutdown. 1.3. Diagnostic Connector (J4) J4 is a Phoenix contact 2.5 mm pitch connector. This port is not for operational use. Service DIAG_RTN DIAG_IN_1 Table 3 Diagnostic Connector Issue 7 Rockwell Automation Publication PD-T813X... -
Page 15: Psu Shutdown Monitor Connector (J6)
Table 5 Serial Port 1 Diagnostic Connectors 1.6. Serial Ports 2 and 3 Connectors (J8 to J11) These are Phoenix 2.5 mm pitch connectors. Service SERIAL_TX_B SERIAL_TX_A SERIAL_RX/TX_B SERIAL_RX/TX_A Table 6 Serial Ports 2 and 3 Connectors Rockwell Automation Publication PD-T813X Issue 7... -
Page 16: Irig-B Connector (J5)
No of Ways J2,J3 18 81 36 7 3JX072 18 81 32 5 3JX073 18 81 34 1 3JX074 J6,J7,J12 18 81 33 8 3JX075 J8,J9,J10,J11 18 81 35 4 3JX076 Table 8 Mating Connectors Issue 7 Rockwell Automation Publication PD-T813X... -
Page 17: Installation
Insert the Adapter into position about 5 mm lower than its final position, and ensure it is slotted in on both sides. Raise the Adapter upwards until the retaining clips click into place. Rockwell Automation Publication PD-T813X Issue 7... - Page 18 2. Installation Trusted TMR Processor Interface Adapter Page intentionally left blank Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 19: Input Configuration
1 V to 6 V into 600 Ω. The Trusted TMR Processor is able to receive signals in the range 0.25 V PK-PK to 10 V PK-PK. IRIG-B122 is normally provide via co-axial cable although any suitable medium would be acceptable. Rockwell Automation Publication PD-T813X Issue 7... - Page 20 3. Input Configuration Trusted TMR Processor Interface Adapter Further information on IRIG-configuration can be found in the standards listed below: • Range Commanders Council IRIG-STANDARD 200-98 • IEEE Std 1344-1995 Annex F.2 Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 21: Available Operations
Dual Peer to Peer communication with Plantguard systems. Variant Options Enabled T8131 ICS 2000 IRIG-B and Modbus Master Enables ICS2000, IRIG-B time signal decode and Modbus Master operation. Table 9 Available Options Rockwell Automation Publication PD-T813X Issue 7... - Page 22 4. Available Operations Trusted TMR Processor Interface Adapter Page intentionally left blank Issue 7 Rockwell Automation Publication PD-T813X...
-
Page 23: Specifications
(operating, storage & transport) 10 % – 95 %, non-condensing Environmental Specifications Refer to Document 552517 Dimensions Height 138 mm (5.43 in) Width: 120 mm (4.72 in) Depth: 108 mm (4.25 in) Weight 877 g (1.93 lb) Rockwell Automation Publication PD-T813X Issue 7...
Need help?
Do you have a question about the Trusted T813 Series and is the answer not in the manual?
Questions and answers