Wheels; Troubleshooting - Hyundai HYM3800E Instruction Manual

Maintenance

Wheels

1 The wheels can be removed for greasing with a general purpose grease before each grass
cutting season.
2 Pull the wheel trim off and remove the R Clip. Slide the wheel off and apply some grease to
the axle.

Troubleshooting

!
For faults not listed in this table, or which you cannot resolve by yourself, please
contact our aftersales team. Where necessary, all corrective actions should be carried
out by suitably qualified persons.
Motor won't start
Mower not collecting grass
Mower does not cut grass
cleanly.
www.hyundaipowerproducts.co.uk
• Check the fuse in the plug.
• Check the cable for damage.
• Make sure you are holding in the RED button while pulling the
OPC lever.
• If the motor is hot, leave to cool down and try again.
• Check underneath for excessive build-up of grass clippings
which may be jamming the blade.
• Make sure mulching plug is removed.
• Clean under the deck of the mower and the exit chute into the
grass collector.
• Check if the blade is blunt. Sharpen or replace if needed.
• Check that the cutting height suits the grass length.
01646 687 880 sales@hyundaipowerproducts.co.uk
33