Table of Contents
Advertisement
2. Input and Output Filter Sets - Filter sets are used to block
TCP/IP Ethernet Setup and DHCP
If you are setting up your network for the first time, read Chapter 4,
Configuring for Internet Access, before proceeding. The chapter
contains important information on how to assign IP addresses for your
network.
From Menu 3 - Ethernet Setup, enter 2 to go to Menu 3.2 - TCP/IP
Ethernet Setup.
1. DHCP - This field determines what mode of DHCP (Dynamic
26 Installation
network (looks like a bigger telephone plug). Determine which type
you are using and select the appropriate option.
certain packets to reduce traffic and to prevent a security breach.
Filtering is a very involved subject, so leave these fields blank for
the time being. After you have studied filtering in Chapter 9, come
back and define the filter sets.
Figure 3-8 Menu 3.2 - TCP/IP Ethernet Setup
Host Configuration Protocol) support your Prestige should use. If
set to None, DHCP will not be used. If set to Server, your Prestige
Advertisement
Table of Contents
