Safety; Safety Guidelines - Barco SLite Series Installation Manual

Fixed display
Hide thumbs Also See for SLite Series:
Table of Contents

Advertisement

1. SAFETY

1.1 Safety Guidelines

Personal Protection
Image 1-1
Warning
Be aware of suspended loads, wear a hard hat to reduce the risk of personal injury. Mind your fingers while working with heavy
loads.
Installation Personnel
This installation must be performed by authorized and qualified technical personnel only.
Accredited Safety Officers must ensure the safety of the site, construction, assembly, connection, use, dismantling, transport etc. of
such safety critical systems.
Caution
Installation should be performed only after you are thoroughly familiar with all of the proper safety checks and installation instructions.
To do otherwise increases the risk of hazards and injury to the user.
Assembly parts are designed for intended use only in conjunction with BARCO LED walls.
Do not modify and/or replicate any component. BARCO uses specific materials and manufacturing processes in order to achieve
part strength. Consult BARCO for assistance with custom applications.
Always follow BARCO Installation Instructions. Contact BARCO if you should have any question regarding the safety of an appli-
cation.
The manufacturer assumes no liability for incorrect, inadequate, irresponsible or unsafe assembly of systems.
Product Care
Structural & Mounting Components should be kept dry, clean, lubricated (only if recommended), coated properly, and otherwise
maintained in a manner consistent with part design. BARCO products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear, deformation, corrosion and any other circumstances that may affect the load handling
capability of the part.
BARCO recommends inspections at regular intervals for all installations and increasing in frequency for more critical installations. If
a part is found to have damage, which may cause a decrease in load capability, the part must be removed for service or replaced
immediately.
Under no circumstances are BARCO parts repairable by anyone other than BARCO.
R5976575 FIXED SLITE DISPLAY 17102003
Image 1-2
Image 1-3
Suspended Loads
Hard Hat
Image 1-4
Mind Your Fingers
1. Safety
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slite10Slite14R9004200R9004300

Table of Contents