ZyXEL Communications Omni 288S User Manual page 5

The Load Number (LN) assigned to each terminal device denotes the percentage
of the total load to be connected to the telephone loop used by the device without
overloading. The termination on a loop may consist of any combination of
devices, subject only to the requirement that the total of the Load Numbers of all
the devices not exceed 100. The load number for the Omni 288S is 10.
This apparatus does not exceed the class B limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of Industry Canada.
Telephone Company Requirements
It is not necessary to notify your telephone company before installing the modem, but
your telephone company may request the following information:
Telephone number to which the modem is connected.
Manufacturer and Model Number.
ZyXEL Communications Corporation
Omni 288S
FCC Part 68 Approval Number and REN#.
1ROTAI-22730-PT-E
REN# 0.3B
You will find also this information on a sticker on the bottom of the modems case.
The modem is connected to a public switched line using a USOC (Universal Service
Order Code) RJ11C modular jack.
Foreword
iv