ZyXEL Communications Omni 288S User Manual page 23

If you are logging on to a Novell network, then select "IPX/SPX
Compatible."
Once complete click on "TCP/IP Settings."
If your host requires you to specify an IP address (Static IP), then click on the
"Specify and IP address" radio button and enter your IP address. If your host
assigns an IP when you log in (Dynamic IP), then leave the "Server assigned IP
address" checked. Most servers assign an IP to you when you log in.
Click the "Specify name server address" radio button and enter your primary and
secondary DNS (Domain Name Server) IP.
In most cases, you should leave "Use IP header compression" and "Use default
remote gateway" checked. When all of the selections have been made, click the
"OK" buttons on all three opened dialog boxes.
This completes the remote connection definition. Locate the new connection icon
in your "Dial-up Networking" folder, and double click on it.
Chapter 2 - Installation
2-8