Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison BWTOTCOT
Summary of Contents for Walker Edison BWTOTCOT
- Page 1 Item #: BWTOTCOT 09/2018 2018...
- Page 2 7.5 in. H on the upper 7 in.
-
Page 3: Parts List
Parts List... -
Page 4: Hardware List
Hardware List Ref. Qty. 10x40mm 14x60mm 7x100mm 1/4x110mm Hex Key 7x50mm 4x35mm 62mm Spacer Hammer required for assembly... - Page 5 Step 1 Insert wood dowels (A) into guardrails (6, 7, 8, 9, 10, 11,12). Step 2 This up Arrow Attach posts(1) and(2) to grid(10) using wood joint connectors (C). Attach posts(3) and(1) to grid(10) using wood joint connectors (C). Attach posts(4) and(5) to grid(1) using wood joint connectors (C). 2x...
- Page 6 Step 3 Attach ladder rungs (12) to ladder legs (13, 14) using wood joint connectors (G). Step 4 Insert barrel nut (E) into pre-drilled holes on guardrails (6, 7). Attach guardrails (6, 7) to end rails (11) using wood joint connector (D). Wood joint connector (D) will screw into barrel nut (E).
- Page 7 Step 5 Insert barrel nut (E) into pre-drilled holes on guardrails (6, 7). Attach guardrails (6, 7, 8, 9) to end rails (10) using wood joint connector (C)and Wood joint connector (D) will screw into barrel nut (E). Step 6 Insert wood dowels (B) into pre-drilled holes on end rail (11) posts.
- Page 8 Step 7 Attach ladder to upper and lower bunk assembly using wood joint connectors (G). Step 8 Attach wood slat (15) to guardrails on upper and lower bunk assembly using wood joint connector (H). Use wood spacer (K) to ensure proper spacing.
- Page 9 Disassembly Instructions Step 1 Undo steps 6 and 7 of this instruction set. Place the separate beds on the floor as pictured. Step 2 Remove the parts indicated by the arrow.
- Page 10 Step 3 Reverse the parts according to the image. Reassemble the parts. Step 4 Congratulations! This bunk was transformed into two beds with headboards and footboards. P.10...