Related Manuals for Walker Edison BWJRTOT
Summary of Contents for Walker Edison BWJRTOT
- Page 1 Item #: BWJRTOT Assembly Instructions Item #: BWJRTOT Item #: BWJRTOL Révisé en 12/2017 Revised 09/2023 V5 2018...
- Page 2 WALKER EDIS ON 74-75 in. L x 37 1/2 - 38 1/2 in. W x 7 in. H on the upper DANGER D’ ÉTRANGLEMENT- Ne jamais attacher ni suspendre quelque chose au lit, qui ne fait pas partie du lit superposé. Ceci inclut, sans s’y limiter : crochets, ceintures ou cordes à...
- Page 3 11 11 Additional part 15 is included for assembling the triple bunk bed option...
- Page 4 Ref. Qty. 10x40mm 7x40mm 7x80mm 7x120mm 7x100mm 4,0x30mm Hex Key 15x100mm 15x50mm 1/4x90mm 1/4x90mm 8x35mm...
- Page 5 Step 1 Insert wood dowels (A) into slats (10,13,14 and 15). 10x40mm Step 2 Insert wood dowels (A) into guard rails (18) 10x40mm and Sider rails (39,41 and 44).
- Page 6 Step 3 7x120mm Attach legs (1,3) to slats (10,13,14) using screws (H) and Hex Key (L). Hex Key Step 4 7x120mm Attach legs (2,4) to slats (10 and 13) using screws (H) and Hex Key (L). Hex Key...
- Page 7 Step 5 1/4x90mm Insert barrel nuts (P) into side rails (41 and 44) Attach side rails (41 and 44) to legs (2 and 4) using bolts (O) and Hex Key (L). Leave the bolts (O) loose for furure Steps Hex Key Hex Key Step 6 Insert barrel nuts (P) into side...
- Page 8 Step 7 1/4x90mm Insert barrel nuts (P) into side rail (41) Attach side rail (41) to legs (1 and 2) using bolts (O) and Hex Key (L). Leave the bolts (O) loose for future Steps Hex Key Hex Key Step 8 Insert barrel nuts (P) into side rail (39) Attach side rail (39) to legs (3 and 4) using bolts (O) and Hex Key (L).
- Page 9 (G) and Hex Key (L). Then tighten all bolts (D) on all Side Rails (39, 41, 44) Hex Key Hex Key Item #: BWJRTOT To assemble Bunk Bed please continue onto step 10. Item #: Triple Bunk Bed To assemble the Triple Bunk Bed please skip to step 17.
- Page 10 Step 10 Insert wood dowels (Q) into side rails (39,41and 44). 8x35mm 7x80mm Attach parts (15) to legs (3 and 4) using bolts (G) and Hex Key (L). Hex Key Hex Key P.10...
- Page 11 Step 13 7x40mm Attach guard rail (16) to ladder side rails (11and 12) using bolts (F) and Hex Key (L). Hex Key Hex Key Step 14 18 18 4,0x30 Connect guard rail support (05) to guard rails (16 and 18) and side rails (39 and 41) using screw (J). Follow measurements shown in diagram.
- Page 12 Step 11 7x100mm Attach ladder side rail (11 and 12) to parts (15) using bolts (I) and Hex Key (L). Hex Key Hex Key Step 12 7x40mm Hex Key Hex Key Attach ladder side rail (11and 12) to side rail (39 and 44) using bolts (F) and Hex Key (L).
- Page 13 Step 15 2 1/2" 2 1/2" Apply pressure to cross beams (41,44) to ensure that mattress supports (23) fit evenly between cross beams Fix the slats as shown in the drawing, on the support of the rails to avoid accidents 4,0x30mm Install slat kit (23) to bed rails with screws (J).
- Page 14 Step 16 2 1/2" 2 1/2" Apply pressure to cross beams (39,41) to ensure that mattress supports (23) fit evenly between cross beams Fix the slats as shown in the drawing, on the support of the rails to avoid accidents J J J 4,0x30mm End of Bunk Bed Assembly...
- Page 15 Step 17 Use this step for Triple Bunk Assembly Insert wood dowels (Q) into side rails (39,41and 44). 8x35mm 7x80mm Attach parts (15) to legs (3 and 4) using bolts (G) and Hex Key (L). Hex Key Hex Key P.10...
- Page 16 Step 18 7x100mm Hex Key Hex Key Attach ladder side rails (11 and 12) to parts (15) using bolts (I) and Hex Key (L). Step 19 Attach ladder side rails (11and 12) 7x40mm to side rails (39 and 44) using bolts (F) and Hex Key (L).
- Page 17 Step 20 7x40mm Attach guard rail (16) to ladder side rails (11and 12) using bolts (F) and Hex Key (L). Hex Key Hex Key Step 21 " 3 / 8 18 41 4,0x30 Connect guard rail support (05) to guard rails (16 and 18) and side rails (39 and 41) using screw (J).
- Page 18 Step 22 2 1/2" 2 1/2" Apply pressure to cross beams (41,44) to ensure that mattress supports (23) fit evenly between cross beams Fix the slats as shown in the drawing, on the support of the rails to avoid accidents 4,0x30mm Install slat kit (23) to bed rails with screws (J).
- Page 19 Step 23 2 1/2" 2 1/2" Apply pressure to cross beams (39,41) to ensure that mattress supports (23) fit evenly between cross beams Fix the slats as shown in the drawing, on the support of the rails to avoid accidents J J J 4,0x30mm Install slat kit (23) to bed rails with screws (J).
-
Page 20: Final Assembly
Step 24 15x100 15x50 Final Assembly P.20...