Overload
0,5 A / 250 V „F" mark fuse, 10 A
protection
/ 250 V fuse
AC current
Range
Accuracy
400 μA
4 mA
+/- (1,5%
+ 5)
40 mA
400 mA
+/- (2,0% +
10 A
15)
Overload
0,5 A / 250 V „F" mark fuse, 10 A
protection
/ 250 V fuse
Frequency
400mA: 40-400Hz • 10A: 40-
range
100Hz
Kapacitás
Range
Accuracy
4 nF
+/- (2,5%
+ 6)
40 nF
400 nF
+/- (3,5%
4 μF
+ 8)
40 μF
200 μF
+/- (5,0% +
8d)
Overload
250V AC/DC RMS
protection
Diode test
Function
Description
Measures
the opening
voltage of the
diode
Resolution
0,1 μA
1 μA
Overload protection
10 μA
Warning: Do not connect an outside power source to the
wires!
100 μA
Frequency
10 mA
Resolution
1 pF
Inward sensitivity
10 pF
Overload protection
100 pF
1 nF
Temperature
10 nF
100 nF
Test state
Opening DC
current appr. 0,5
With a K type temperature measurement
mA
sensor
Closing DC
voltage appr.
Temperature measurement
1,5 V
Set the function switch to the „C" position.
•
Connect the probe's connector to the „K
•
TEMP" connector (note the polarity) and the
other end onto the measured surface. The
temperature is displayed on the screen in °C
If the resistance
between the V/
Ohm and the
COM is lower
than 50 Ω the
device beeps
Range
Accuracy
100 Hz
1000 Hz
10 kHz
+/- (0,5%
+ 4)
100 kHz
1 MHz
30 MHz
Range
Accuracy
<400°C ±
(-40–
(0.8%+4)
1000)°C
>400°C ±
(1.5%+15)
EN
User Manual
Opening
voltage appr.
0,5 V
250 V DC / AC
RMS
Resolution
0,01 Hz
0,1 Hz
1 Hz
10 Hz
100 Hz
1 kHz
0,7 V
250 V DC / AC
RMS
Test state
1°C