ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-D1 Quick Start Manual page 9

• Type the Network Password for your network. This will connect you to other Home-
Plug AV devices which have the same password and allow you to configure them.
HomePlugAV is the default password for ZyXEL HomePlug AV devices.
• You do not need to type the Device Access Key (DAK) for the P-660HWP-Dx unless
you want to change it.
• Click Apply.
4 Go to Network > Powerline > Remote Setting to make a new network with a new
Network Password and add the other HomePlug AV devices to your new network.
• Select a device listed in Remote Stations In The Same Network and type a new
Network Password.
• Type the Device Access Key (DAK) in the Login Remote Device Access Key field.
The DAK identifies each device. For ZyXEL HomePlug AV products the DAK is on
an attached label. Click Apply. The device disappears from the list of Remote Sta-
tions In The Same Network. With a different password it now is on a different net-
work.
• Repeat for all devices you want to add to your network.
5 Go back to Network > Powerline > Local Setting to change your P-660HWP-Dx's
Network Password to the new one and connect it to your new HomePlug AV network.
Type your new Network Password and click Apply.
6 Check the other devices you selected previously are now on the list of Remote
Stations In The Same Network by going to Network > Powerline > Remote Setting. If
all devices are correctly listed, your HomePlug AV network is now ready for use.
P-660HWP-Dx Quick Start Guide
8