ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-D1 Quick Start Manual page 11

section and enter it in the IP Address field. If not, select Obtain an IP Address
Automatically. Click Apply and run the Internet/Wireless Setup wizard again r
If you have a DSL connection and have entered your ISP settings, but you
cannot access the Internet, follow these steps.
1 Check you have correctly entered the information your ISP gave you.
2 If you are using Bridge mode (check Mode in the Network > WAN > Internet
Connection screen) click NAT > General and ensure Active Network Address
Translation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is
set to None. Your ISP gives your computer an IP address directly. If you want to
access the P-660HWP-Dx again, you need to use a static IP address in the same
subnet as your P-660HWP-Dx (the P-660HWP-Dx's default IP LAN address is http://
192.168.1.1).
3 Click the wizard icon (
4 Contact your Internet Service Provider to check the status of your account.
5 If you still have problems, see Troubleshooting in the User's Guide.
If you cannot access the Internet using the wireless network, do the
following.
On a computer connected to the P-660HWP-Dx, make sure your P-660HWP-Dx and the
computers on your wireless network are using the same SSID, channel and wireless
security settings. See the chapter on Wireless LAN in the User's Guide for more
information.
P-660HWP-Dx Quick Start Guide
). Run the Internet/Wireless Setup wizard again.
10