ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-D1 Quick Start Manual page 7

1 Select Active and click Next to continue. It is strongly recommended that Enable
OTIST is NOT selected. See the Users' Guide for more information on OTIST.
2 Configure your wireless settings in the screen displayed. Click Next.
3 If you select either WEP or WPA-PSK security (recommended), then follow the directions
to enter the appropriate key. Click Next to continue and Apply to save your wireless LAN
settings.
4 Check your configuration in the screen below and write down your wireless LAN settings
for later use.
P-660HWP-Dx Quick Start Guide
6