Figure 17 Wireless Client Mode Wireless Settings - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

2 You should now see a tab that says Site Survey (refer to
window should pop up which contains a list of all available wireless devices within your
ZyXEL Device's range. Copy the SSID of the AP you want your wireless client to
connect to (refer to
3 For this example, you want to connect to the access point, A.The SSID that you should
copy is ZyXEL NWA-1100 A (refer to
4 Go back to the screen in
to Figure
5 Set the Wireless Mode to the same one set for the access point. Click Apply.

Figure 17 Wireless Client Mode Wireless Settings

ZyXEL NWA-1100 User's Guide
Figure 19).
Figure 17. In the SSID field, enter ZyXEL NWA-1100 A (refer
18).
Figure 18). Click on this. A
Figure 15 to check the SSID of Station A).
Chapter 4 Tutorial
47