Figure 28 Wireless Settings: Wireless Client; Table 15 Wireless Settings: Wireless Client - ZyXEL Communications G-570S User Manual

Figure 28 Wireless Settings: Wireless Client

The following table describes the labels in this screen.

Table 15 Wireless Settings: Wireless Client

LABEL
Basic Settings
Operation
Mode
SSID
Site Survey
Advanced
Settings
Manual MAC
Cloning
Radio Enable
ZyXEL G-570S User's Guide
DESCRIPTION
Select the operating mode from the drop-down list. The options are Access Point,
Wireless Client, Bridge and AP+Repeater.
Wireless stations associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 printable characters) for the wireless LAN.
Spaces are allowed.
Note: If you are configuring the device from a computer connected
to the wireless LAN and you change the device's SSID,
channel or security settings, you will lose your wireless
connection when you click Apply to save your settings. You
must then change the wireless settings of your computer to
match the device's new settings.
Click this button to see details of access points (APs) within range.
Every Ethernet-capable device is issued with a unique Media Access Control
(MAC) address at the factory. This address is used to identify the device across a
network. Your ZyXEL Device is capable of "cloning", or emulating, the MAC
addresses of one or more other devices.
Select the check box and enter the MAC address you want to clone.
Turn on the wireless adapter to allow wireless communications between the
device and other IEEE 802.11b and IEEE 802.11g compliant wireless devices.
Turn off the wireless adapter to stop wireless communications between the device
and other IEEE 802.11b and IEEE 802.11g compliant wireless devices.
Chapter 7 Wireless Screens
63