Security: Wep; Figure 32 Security: None; Figure 33 Security: Wep - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

Chapter 7 Wireless Security Screen

Figure 32 Security: None

The default security mode is set to None.
Note that some screens display differently depending on the operating mode selected in the
Wireless > Wireless Settings screen.
You must enable the same wireless security settings on the ZyXEL Device and
on all wireless clients that you want to associate with it.

7.4.1 Security: WEP

Use this screen to use WEP as the security mode for your ZyXEL Device. Select WEP in the
Security Mode field to display the following screen.

Figure 33 Security: WEP

78
ZyXEL NWA-1100 User's Guide