Hydraulic Emptying Of Container For Impurities - SaMASZ MOP 120K Operator's Manual

6.3.

Hydraulic emptying of container for impurities

Sweeper can be equipped with either manual or hydraulic
system of emptying the container. In case of the hydraulic one,
cylinder is mounted on the left side of the sweeper (Fig. 23) on
specially prepared extension arm (1) and
handle mounted directly to the container's side wall (2). Operating
with hydraulic emptying is possible on condition, that the tractor's
hydraulic installation features an additional pair of EURO type
hydraulic connectors.
A hydraulic discharge unit can be installed on the sweeper by the user, provided such feature
is made available on a given sweeper model by its manufacturer. Fig. 24 provides requirements a
sweeper should meet so that a hydraulic discharge unit could be installed properly.
4
1
3
Fig. 24. Hydraulic discharge unit mounting points – requirements: 1 - pin ∅20 for hydraulic cylinder
installation, 2 - two holes ∅11 for tightening hopper arm, 3 - hole for cotter pin ∅6.3x71, 4 - hole for bolt
M8 for tightening mounting bracket for the cylinder hydraulic hoses.
Before approaching the installation, prepare any tools necessary for this task to provide a
problem-free installation of the hydraulic discharge unit on the sweeper:
two flat wrenches, possibly: flat wrench and ring/socket wrench, size: 13, 17;
flat wrench: 19;
outer snap ring pliers.
All footnotes regarding assembly parts are in reference to items in Table-7 of the sweeper's
parts catalogue.
Operator's manual
- 19 -
Tractor sweeper
Fig. 23.
2
MOP