SaMASZ MOP 120K Operator's Manual page 19

Fig. 17. Water spray system mounting points – requirements. 1 - mounting brackets for foot of the water
spray system frame. 2 - right and left bracket for mounting sprayer bar.
All footnotes regarding assembly parts are in reference to items in Table-6 of the sweeper's
parts catalogue.
Before approaching the installation, prepare any tools necessary for this task to provide a
problem-free installation of the water spray system on the sweeper's body:
Two flat wrenches, possibly: flat wrench and ring/socket wrench, size: 13, 17;
Flat wrench: 10.
Philips screwdriver PH2x100.
To install a water spray system set the sweeper on an even, paved ground, and then proceed
as follows on Fig. 18:
1
2
4
Fig. 18. Sequence of operations performed when installing a water spray system
Operator's manual
1
- 17 -
Tractor sweeper
MOP
1
2
2
2
3