Table 112 Sys Log; Log Commands - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

G-3000H User's Guide
Table 111 ICMP Notes (continued)
TYPE CODE
0
1
2
3
8
0
11
0
1
12
0
13
0
14
0
15
0
16
0

Table 112 Sys log

LOG MESSAGE
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the
use the commands).
Configuring What You Want the ZyAIR to Log
Use the sys logs load command to load the log setting buffer that allows you to configure which logs
the ZyAIR is to record.
278
DESCRIPTION
Redirect datagrams for the Network
Redirect datagrams for the Host
Redirect datagrams for the Type of Service and Network
Redirect datagrams for the Type of Service and Host
Echo
Echo message
Time Exceeded
Time to live exceeded in transit
Fragment reassembly time exceeded
Parameter Problem
Pointer indicates the error
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
This message is sent by the "RAS" when this syslog is
generated. The messages and notes are defined in this
appendix's other charts.
Command Interpreter appendix
DESCRIPTION
explains how to access and
Appendix J Log Descriptions