System Maintenance And Information; Command Interpreter Mode - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

This chapter leads you through SMT menus 24.8 and 24.10.

24.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 –
System Maintenance. A list of valid commands can be found by typing help or ? at the
command prompt. Type "exit" to return to the SMT main menu when finished.
Chapter 24 System Maintenance and Information
System Maintenance and
C
H A P T E R
Information
G-3000H User's Guide
2 4
219