Figure 32 Station Mode: Profile: Select A Channel; Table 13 Station Mode: Profile: Select A Channel - ZyXEL Communications ZyXEL ZyAIR G320H User Manual

2 If you select the Infrastructure network type in the previous screen, skip to step 3. If
you select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.
To associate to an ad-hoc network, you must use the same channel as the peer
computer.

Figure 32 Station Mode: Profile: Select a Channel

The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL
Wireless Settings
Channel
Wireless Mode
3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,
WPA, WPA2-PSK, WPA2 or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select Disabled to allow the G-320H to communicate
with the access points or other peer wireless computers without any data encryption and
skip to step 5.
G-320H User's Guide
DESCRIPTION
Select a channel number from the drop-down list box. To associate with an ad-hoc
network, you must use the same channel as the peer computer.
This displays b+g and allows the G-320H to connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.
Chapter 4 Wireless Station Mode Configuration
53