ZyXEL Communications G-360 Quick Start Manual

ZyXEL Communications G-360 Quick Start Manual

802.11b/g wireless pci adapter
Hide thumbs Also See for G-360:

Advertisement

Quick Links

ZyXEL G-360
(Hardware Revision v2)
802.11b/g Wireless PCI Adapter

Quick Start Guide

Version 1.0
May 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G-360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZyXEL Communications G-360

  • Page 1: Quick Start Guide

    ZyXEL G-360 (Hardware Revision v2) 802.11b/g Wireless PCI Adapter Quick Start Guide Version 1.0 May 2005...
  • Page 2: Important Note

    ZyXEL G-360 Quick Start Guide Important Note Federal Communications Commission (FCC) Interference Statement FCC Certification The United States Federal Communication (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part 15, Class B The device complies with Part 15 of FCC rules.
  • Page 3 ZyXEL G-360 Quick Start Guide 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Caution 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.
  • Page 4: About Your Zyxel G-360

    About Your ZyXEL G-360 Thank you for purchasing ZyXEL G-360! The ZyXEL G-360 is an IEEE 802.11g compliant wireless LAN PCI Adapter that fits into any PCI slot. With the G-360, our G+ SuperSpeed technology allows you to enjoy the benefits of wireless networking with data rates up to 125Mbps.
  • Page 5 The installation procedures are similar for all supported Windows versions. Windows XP screen shots are shown unless otherwise specified. DO NOT install the ZyXEL G-360 at this point. The G-360 Utility should be installed first. Insert the support CD into the CD-ROM drive on your computer. The CD automatically runs.
  • Page 6: Hardware Installation

    Remove the computer cover and the ZyXEL G-360 from its packaging. 2. Remove the ZyXEL G-360 from the package and insert the ZyXEL G-360 into an available PCI slot. Make sure the ZyXEL G-360’s contacts are fully seated in the PCI slot.
  • Page 7: Important Notice

    ZyXEL G-360 Quick Start Guide 3. Secure the ZyXEL G-360 to the computer with a bracket screw. 4. Attach the included antenna to the ZyXEL G-360. The antenna should be perpendicular to the ground. 5. Replace the computer cover and power on your computer.
  • Page 8: Troubleshooting

    Make sure you are in the coverage of the AP/Router you connect PWR is on. Windows does not Make sure the ZyXEL G-360 is inserted into the computer PCI auto-detect the slot properly and then restart your computer. Check the LEDs on ZyXEL G-360.

Table of Contents