Figure 28 Station Mode: Security Setting: Ieee 802.1X; Table 9 Station Mode: Security Setting: Ieee 802.1X - ZyXEL Communications ZyXEL ZyAIR G320H User Manual

Chapter 4 Wireless Station Mode Configuration
Table 8 Station Mode: Security Setting: WPA/WPA2
LABEL
Certificate
Validate Server
Certificate
PEAP Inner EAP
Back
Next
Exit
4.3.1.4 IEEE 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.

Figure 28 Station Mode: Security Setting: IEEE 802.1x

The following table describes the labels in this screen.

Table 9 Station Mode: Security Setting: IEEE 802.1x

LABEL
Authentication
Type
Login Name
Password
48
DESCRIPTION
This field is only available when you select TLS in the Authentication Type field.
Select a certificate used by the authentication server to authenticate the G-320H.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more
information.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type
field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
49.
G-320H User's Guide